M550 Tile Grout

M550 is a high quality cement based tile grout with special components such as high bond adhesive, anti-crack, reducing water absorbance, anti-fungus and easy to clean. It can be applied immediately after mixed with clean water at the recommended ratio.

Instruction of preparation and application surface preparation

Before grouting, clean the surface and joint until free from dirt, oil, water, dust and any particles and contaminates which can effect to the bond adhesion. 

Mixing

Mix 1 kg of TPI M550 with 0.3 liters of clean water until the mixture is homogenous.

Grouting 

Fill the mixture between the tiles joint by using with rubber trowel to swipe and press diagonally to be smooth. Wait until it is almost dried then clean off the excess grout on the tile surface.

Typical Data

Approximately usage area 5 m per 1 kg and the recommended joint width is 1-6 mm.