Product Characteristics

It is 100% PVSC acrylic water paint without vapor smell. It can be applied to walls both interior and exterior, reflects UV and infrared rays, prevents fungus and is resistant to wiping, it is environmental friendly and safe for human.

Scope of Use

It is suitable to paint on plastered wall, concrete wall, fiber cement board and wood by using brush, roller and spray apparatus. (For more effective performance, it should be used together with TPI primer paint NP 100S or NP 100SW.)

Surface Preparation and Instruction use

Surface preparation

1.For new plaster wall: Wait to dry wall surface and make sure to clean surface free from dust and any contaminates of cement and wax stains. Apply TPI primer NP100S or NP100SW with one layer based coat on the surface then coating over with TPI Top Coat as for next layer.

2.For old plaster wall (To repaint the wall): Scrub off old paint and clean the surface free from dust, dirt or any contaminates and if it has holes and cracks on wall, repair holes and cracks with filler before repainting. Apply TPI Primer paint NP100S or NP100SW as base coat and wait to dry then coating over with Top Coat application.

Application

• Stir paint in the container well and no need to add water or other into the mixture. If it is needed, maximum dilution with clean water 10 % of paint by volume.
• Apply 1-2 coats wit brush or roller or spray application on the surface which has been already primed with Base Coat/ Primer paint.

Application Data