Product Characteristics

TPI 404S Marine Dry Concrete is suitable for concrete works in coastal or marine area environments where high sulfate and chloride salts could contact concrete. After mixing with recommended ratio with water, it can be used without any other additives and the concrete work will have compressive strength of minimum 350 KSC (Cylinder) or 400 KSC (Cube) such as casting pile, casting beam and footing works. This concrete will withstand sulfate and chloride attacks.

Instruction for mortar preparation

• It is suitable for common concrete work such as ground leveling, post-lintel, road construction, car park, and reinforced concrete with sulfate and chloride resistance.
• In case of large volume of lean concrete works are involved, addition of stone size ½ or ¾ could be included in pouring mixture.
• Mix 1 bag (50 kg) of TPI M404S with 7-8 liters of clean water, then apply according to the common practices for concrete work.
• In case a special concrete mix with desired properties is required by addition of admixtures, then user can add the additives according to the ratio and procedure given by the manufacturer of the additive.
• In case of large leveling work, add clean stones size ½ or ¾ grade (conforms to ASTM C33) with mixing ratio 30 kg of stone per 1 bag (50 kg) of mortar.