Acid Resistant Mortar M250

• For thin plastering on concrete brick wall and light load floor.
• Able to resist concentrate acid up to pH3.
• Can be mixed with stone for concrete work.

How to prepare the plastering work.

1.Clean the surface area from dust, oil, chemicals other contaminants that could prevent adhesion. After that rinse the surface with water and leave it to almost dry.

2.Use TPI M250 1 bag (20 kg) with 2.7 liters of water, mix until the mixture is homogeneous and continue mixing for 5 minutes before use.

3.Apply the mixture by plastering in layers-with steel trowel layer by layer of 5 mm. When the first layer is almost dry, plaster the second layer until it reach to 10 mm thickness. When it's almost dry it should be polished by steel trowel. 

How to prepare as a concrete work.

1.Mix TPI M250 1 bag (20 kg) with 20 kg of stone size ½ - ¾ and 3 liters of water, together until the mixture is homogenous and continue mixing for 5 minutes before usage.

2.Apply the mixture on concrete work following the common construction procedure.

Remark: 

Avoid to direct contact with cement mortar, and should wear protection equipment such as rubber glove, particulate respirator or face mask.