Product Characteristics

General Plastering Mortar is suitable for a general plastering works on clay brick and concrete block for both interior and exterior walls. It conforms to TIS 1776-2560.

How to use

1.Clean and rinse through the surface on the wall to be plastered.

2.Mix plaster Mortar TPI (M209) with clean water 3.5 ratio.

3.Mix it with water until the mixture is homogeneous.

4.Ready to process with the ordinary works and it can also be used with plastering machines.

Raw Material

• TPI Portland Type 1 according to standard ASTM C-150 and TIS 15 part 1-2547.
• Fine Limestone is thoroughly dried and classified.
• High quality chemicals additives that improve water absorption, better work ability and reduces cracking and prevents shrinking.

How to use

1.Clean and rinse through the surface on the wall to be plastered.

2.Mix Plaster Mortar TPI M209 with clean water 3.5 ratio.

3.Mix it with water until the mixture is homogeneous.

4.Ready to process with the ordinary works and it can also be used with plastering machines.